University Logo
       Nano-Micro Thermal Group

HOME

PEOPLE

PUBLICATIONS

TEACHING

CONTACT

NEWS

OUTREACH

News

2021:

January 2021: Scott is quoted in healthline.

2021:

December 2020/January 2021: Morteza, Arad, and Scott presents virtual posters at NSF's Thermal Frontiers Workshop.

2020:

December 2020: Congratulations to Morteza on his PhD defense.

 Morteza PhD Defense

August 2020: Kunal Dixit joins the group.

July 2020: In collaboration with our partners Intuitive Surigical foundation, we released a pre-print of our work on improvised mask filtration and pressure drop performance. Our manuscript was cited in recent CDC guidance.

May 2020: Welcoming Natalia Basauldo, who will be doing an LSAMP REU internship on improvised mask testing with our group.

May 2020: Congratulations to Rebecca on her MS defense and her new job as an R&D Leadership Program Associate.

March 2020: Jacob, Xiabo, Arad, Matthias, Peter (UMD), and Guangwen's paper on the "Influence of processing and microstructure on the local and bulk thermal conductivity of selective laser melted 316L stainless steel." was recently accepted to Additive Manufacturing.

Vahideh and Hiep present their papers at Semi-Therm 2020.    

2019:

December 2019: Morteza, Rebecca, and Anibal's paper titled "Adsorption transparency of supported graphene" was just published in Carbon.  

September 2019: Yingchun, Morteza and Rebecca's paper titled "Thermodynamic limits of adsorption heat pumps: A facile method of comparing adsorption pairs" was just published in Applied Thermal Engineering.  

August 2019: Arad, Benson Chan (IEEC), Scott Moser (E&IP), and Scott Schiffres complete the National Science Foundation's I-Corps bootcamp.

July 2019: Congrats to Matthias on his MS thesis titled "Thermal Anisotropy of Cu3Sn"!

May 2019: Congrats to Jacob on his MS thesis titled "Influence of Processing and Microstructure on the Thermal Conductivity of Selective Laser Melted 316L Stainless Steel"!

May 2019: Arad presents paper on "Additive Laser Metal Deposition Onto Silicon for Enhanced Microelectronics Cooling"  at the 2019 IEEE Electronic Components and Technology Conference (ECTC) in Las Vegas, NV.  

May 2019: Scott presents invited tech talk at 2019 ITherm.  

April 2019: Morteza presents "Adsorption Transparency of Supported Graphene to Water Molecules", Arad presents "Laser Metal Additive Manufacturing onto Silicon," and Scott presents Jacob's recent work on "Optimizing Process Parameters in Selective Laser Melting to Alter Thermal Conductivity" and Matthias' work on  "Thermal Conductivity of Cu3Sn" at the MRS Fall Meeting in Phoenix, AZ.

February 2019: Scott recently received an NSF CAREER award for a project titled "Intermetallic Interfacial Thermal Transport for Advanced Electronics Manufacturing".  

January 2019: Our lab recently received two SRC grants in collaboration with Prof. Bahgat Sammakia and Prof. SB Park.

January 2019: Our research on direct laser metal printing onto silicon has been featured in several trade publications: ACM, Electronics Cooling, Network World, Electropages, RackSolutions.

January 2019: Scott participates in the American Society for Engineering Education's 2019 National Effective Teaching Institute (ASEE NETI 1A) workshop in San Diego, CA.

2018:

November 2018: Binghamton University's homepage features our research into direct metal printing onto silicon

September 2018: Congrats to Arad and Matthias for their just-accepted Additive Manufacturing paper titled "Additive Laser Metal Deposition onto Silicon"

June 2018: Welcome to our two newest lab members Renee from UMBC (NSF Energy REU), and Ashlee from BU (NSF LSAMP)

July 2018: Congrats to Arad on his NSF-funded Solid Freeform Fabrication (SFF) Symposium travel award to present his paper on "Laser Metal Additive Manufacturing on Graphite."

July 2017: Lab receives grant from Integrated Electronics Engineering Center to study thermal interface materials as a function of lid metallization

April 2017: Congrats to Rebecca for her NSF S-STEM Scholarship.

2017:

September 2017: Congrats to Matthias for winning 2nd best poster, and Rebecca and Morteza for winning runner up, at the Electronics Packaging Symposium at GE Global Research.

August 2017: Welcome to new members: Yingchun, Jacob, and Tony.

April 2017: Congrats to Matthias for receiving an NSF S-STEM Scholarship

March 2017: Additive manufacturing tour for Vestal, NY teachers

Feb 2017: University Mall Day - additive manufacturing demonstration for the community

Feb 2017: Engineering Week Outreach additive manufacturing demonstration

2016:

Sept 2016: Arad starts as a PhD student, and Matthias starts a master student.

July 2016: Ibrahima presenting poster at McNair Undergraduate Research Conference, Niagara Falls, NY

July 2016: Lab receives grant from Integrated Electronics Engineering Center to study metal-metal defects during simulated processing and aging

January 2016: Alessio and Morteza start as PhD students at Binghamton, and join the lab.

January 2016: Scott moves to Binghamton.



Department of Mechanical Engineering